Steelmans 3D

LokBuild Sheet

$34.99
680
Out of stock
+ -

Product description

Excellent build surface for adhesion, easy part removal, and repeated reuse. Cleans off easily with 90% alcohol or  a little acetone on a paper towel. 


Note: For optimal results, we recommend a gap of 0.20–0.25mm between the nozzle and the LokBuild surface when leveling the build plate. If nozzle is too close during printing, prints can fuse to the build surface. Fused prints are best removed by recalibrating the nozzle farther away, reprinting the first couple of layers, stopping the print, and peeling up fused filament with new layer.

 

**Does not include flexible build plate, LokBuild is only the surface stuck to the top of the build plate.**

 

Sizes Available:

  • NWA3D A5 - 135 x 165 mm (5.3 x 6.5")
  • NWA3D A31 - 300 x 300 mm (12 x 12")
  • 203 x 203 mm (8 x 8")