Push Plastic

Push Plastic PLA 1KG High Heat Colors

Out of stock
+ -

Product description

Push Plastic High Heat PLA Filament


Polylactic acid (PLA) is a thermoplastic made from organic sugars. PLA is the most commonly used 3D printing media and best for a classroom environment.

Printed parts made from High Heat PLA can be heat treated, which can obtain properties that exceed ABS. To achieve a heat treat on a printed part, submerge in water (or bake in oven) at 200F for up to 30 minutes.

Depending on part geometry, setup, and technique, parts can deform and shrink. 
Best results are with flat and/or supported parts with 100% infill.  

The benefits of High Heat PLA include:

  • Affordable
  • Biodegradable
  • Non-toxic
  • Low melt temperature makes easy to print
  • Heat Treating and annealing creates higher temperature resistance
  • Heated bed not required


Recommended Print Settings

  • Printing Temperature: 220°C (sometimes cooler for lighter pigments)
  • Bed Temperature: 0-50°C


Made in the USA in Springdale, Arkansas.

Meets quality standard of 1.75 mm/2.85 mm +/- .05 mm in diameter and .03 mm in roundness.