Push Plastic Wood Fill PLA

Wood Fill PLA is PLA with actual wood additives! Print it with regular PLA settings, but the hotter you print, the darker it will come out! The wood additives tend to make the filament more brittle, use care when loading or unloading it. Wood Fill is very easy to sand to get a great finish.

Click here for our FREE Cura settings and instructions on printing with Wood Fill PLA on the NWA3D A5 or A31. 

**We recommend upgrading your 0.4 mm brass nozzle to a 0.6 mm plated steel nozzle before printing with composite filaments, such as Wood Fill PLA, due to the nature of large particle additives that have the tendency to clog regular 0.4 mm nozzles.**

Push Plastic’s Wood Fill filament possesses characteristics such as:

• Easy to post process and sand
• Affordable
• Biodegradable
• Non-toxic
• Low melt temp makes easy to print
• Heated bed not required

Recommended Print Settings

Printing Temperature: 210-230C

Bed Temperature: 0–60°C

Made in the USA in Springdale, Arkansas.

Meets quality standard of 1.75 mm/2.85 mm +/- .05 mm in diameter and .03 mm in roundness.